Testing Home Assistant Glow for reading my electricity usage in Home Assistant.
Home Assistant: Garage door status with Aqara Vibration Sensor
For almost two years ago, I wrote an article about controlling by garagedoor with the Qubino Flush 1D Relay. I always had a plan to add some status-sensor to the garage door. I started with a 433MHz sensor, but it was never a success. It was hard to place a magnet-sensor and 433MHz is not the best option – so …
Home Assistant – Leaf-MQTT
For some reason the Leaf-component in Home Assistant has not been working for some time. Since November 2020 according to the community forum. UPDATE: Before you read any futher… Home Assistant bumped pycarwings2 to 2.10 in the last 2020.12.2 release. I actually found this out just when I was going to add the data from the solution below, into HA. …
Home Assistant – Migrate from Zwave-integration to OpenZwave (beta)
Migrate from Zwave-integration to OpenZwave (beta)
Apple TV keeps turning on my TV
I recently got a new 4K Apple TV. I replaced this with my old Apple TV 4 in the living-room. Suddenly I could not turn off my TV anymore. When I turned off the TV and/or put the Apple TV to sleep, it took 2-3 seconds and it turned itself on again. I googled and started debugging. All the steps …
Home Assistant in Docker (Ubuntu 16.04)
After problem upgrading to v0.65, I moved my Home Assistant (HA) to docker. Trying to upgrade in virtual environment (VE) was giving an error message that i needed Python 3.5.3.
Fibaro Button (FGPB101) in Home Assistant
It’s about a year ago since i wrote about a panic button setup with the Fibaro Button and Telldus/Tellstick. As I moved my Z-wave devices to Home Assistant, the Button scenes hasn’t been supported and therefore my button has been put away until now.
IKEA Trådfri
I recently bought an IKEA Trådfri gateway and some bulbs. This was a great and cheap supplement for automating my last missing lights. I have two ceiling lights in my hallway. I bought a Double Switch from Fibaro, but it’s a tight fit behind the switch on the wall. Buying two new separate relays for each light would cost too …
Home Assistant
Home Assistant is probably the most flexible and powerful smart home-gateway at this moment!
Nissan Leaf in Home Assistant
I found this: https://github.com/glynhudson/leaf-python-mqtt, and thought it was a simple task… But nooooo. I have very little experience with MQTT, other than the basics, so this took some time 🙂